Precise control of temperature and environment is essential for consistent product in hand shops or fully automated plants. Slow, low temperature fermentation can yield the most favorable products. Our fermentation units can maintain virtually any temperature and humidity under a variety of conditions.
Our roll-in proofers are constructed using two inch thick stainless steel wall and ceiling panels that are foam injected along with the door to ensure that your energy stay inside the box. All models are equipped with heavy-duty welded stainless steel door hinges, to prevent door sagging.
The Controls provide a gentle heat and humidity curve preventing over-shoot so you’re not pouring water down the drain. The control is mounted conveniently on the top level of the door and has large Microcomputer displays for time, temperature and humidity so your operators can keep track of every step of the proofing operation.
Proofers are available in single door, double door and triple wide models in depths starting from 1 rack to even more than 30 racks. All models assemble using an aluminum construction design, minimizing installation time.
Need help picking a model? Consult our sizing guide to select a model that best suits your particular operation.
Standard Features:
| |
Completely Easily Knocked-Down |
| |
Single Door, Double Door, Triple Door |
| |
Air Wash Humidity System |
| |
Microcomputer Controls |
| |
1~220V, 3~220V, 3~380V |
|
|
One-Year Parts and Limited Labor Warranty |
Options and Accessories:
| |
Stainless Steel Floor |
| |
Pass-Through Design |
Adopting circle blower which is able to bear high temperature and damp,intelligent temperature and humidity program controller, controlling outside evaporator,make the temperature and humidity
inside of the proffer arrive at the best proportioning effect,control accurately there is no water on the ground, no drip on the roof. Adopting the aluminum alloy molding frame and the plastic becomes spongy the heat preservation to the interlayered AISI304 Stainless steel plate Adopting thermal insulating antirust armor plates,plug to the parts-to-assemble-together structure. It is not need to exchange the trays ,and guarantees the humidity and temperature even and consistent of every corner inside of the proffer, there are many kinds of products can satisfy with the requirements of customers. |
| model |
power
(kw) |
external dimensions
W×D×H(mm) |
effective cubage(m3) |
| HMC-4/16 |
3 |
1900×1500×2200 |
4.8 |
| HMC-6/16 |
4.5 |
1900×1700×2200 |
5.4 |
| HMC-2/32 |
3 |
1900×1250×2200 |
3.9 |
| HMC-4/32 |
4.5 |
1900×2000×2200 |
5.4 |
| HMC-6/32 |
6 |
2800×2000×2200 |
10 |
| HMC-8/32 |
8 |
3600×2000×2200 |
13 |
| HMC-10/32 |
10 |
4000×2000×2200 |
14 |
|
