Characteristic:

a.Full new appearance,beautiful and elegant,occupy small area;

b.Overall machine adopts Sanyo electric machine in connection with incline gear face decelerator drive,running calm,noise is extremely small;

c.Deep slot U shape bird leading type convey construction,film after multi-layer extrusion has higher image quality.

d.Full mould fabrication, characteristic stablised;

e.High automatization,ready to feed film right after switch on;

f.After feeding the film,automatic equipment starts the following components:

1)Drive electrode

2)Fans

3)Electricity heater

4)Medicine fluid supplying system



In 3 minutes after the last film comes out,all the above-mentioned components will stop working automatically saving energy.The only unchanged thing is the developing temperature.



Application: X-ray film developing,MRI,CT,DSA,laser printing reflect arranging.



Parameter:



1.Application:x ray,CT,MRI,DSA,laser pinting soft film fast developing

2.Film treatment specification:Film minimum length:4"(100mm)

film maximum width 14" x 17" film narrowest:10mm

3.Film developping capacity:68pcs/hour(12" x 15")

4.Film developping velocity:dry in and dry out 90s-360s no grade adjustable

5.Film developping medicine liquid temperature control scope:20C-40C adjustable

6.Drying temperature:55C+5C environment temperature:5C-30C

relative humidity:85%

7.Noise:<50db power supply:220v/50hz power:maximum 1.4kw

8.Medicine liquid slot volume:develop slot,flexation slot,bath slot all are 4.6L

9.Water consumption volume:≤1.5L/minute

10.Machine body volume:810 x 560 x 520(length x width x height)Machine frame excluded

11.Package size for export:740 x 660 x 1200 gross weight:46kg