1:1 clone sioux mod copper/black colors available fast delivery with good quality from Acerig Paypal,China ACERIG price supplier

The Sioux MOD by Chief Vapers

"Blued" Black Chrome Stainless Steel and Copper Body

Fully Telescopic to accommodate 18350 to 18650 batteries

Copper Contacts (+,-)

Adjustable Switch

Adjustable Positive Pin

Top cap, sprocket, firing button and pins are copper with a simple protective film for shipping.

Extra short and small tube can be use for battery extension for Provari.

Top tube threading can be used with Aios. Adjustable pins for 18500 and replacable pins for 18350 mode.

General Tips

• Always insert the positive side of the battery into the tube FIRST! So if your mod was sitting on a table, the positive side of the battery would be facing up and the negative side of the battery should be facing down towards the button (Failing to properly insert your battery can kill your mod)

• Always use protected batteries from reputable brands such as AW, MNKE, Sony, and eFest. Failure to use these batteries can result in explosion and/ or severe incorrect fitment. If your mod is not firing and you ARE NOT using correct batteries.

• Always use a mod safety fuse when running unprotected batteries which should be purchased on our site

• Never stack batteries

• Prior to using your mod, we suggest cleaning the contact pin, firing pin, tube threads, as well as the inside of all of the tubes. To clean simply remove the contact pin from the mod and thoroughly clean the contact pin, firing pin, threads, and inside of the mod tubes with a microfiber towel and standard rubbing Alcohol to remove the manufacturing oil which will decrease the conductivity (aka decrease the resistance/drop voltage)
•