red wine bottling machine Automatic bottle washing filling capping machine 3-in-1 machine(YXT-LS),China 3-in-1 filling machine price supplier

l  The 3-in-1 filling machine is an equipment which  is used for filling Grape wine, juice etc.

l It combines the negative pressure filling machine and bottle stopper machine. It has tight structure to save the space.

l The  3-in-1 filling machine is power supplied by single motor.

 It is with cardan joint and frequency control of motor speed, it can make sure each part of the equipment operate synchronously.

l It is easy to operate, running steadily, the high level of automaticity. 

It could be set stopped automatically if one bottle was blocked in order to protect the equipment from damaging.

l The whole technical process is short and sealed completely, in order to make sure the products are not be polluted.

l The washing machines adopt the strong clamps, so it is very reliable. Each clamp has the system of water spraying. When it has the bottle, it will spray water to wash it ,on the contrary, it will not; So, it can save the water. The machine assembles the system of up and down which is controlled by the electric to meet the different heights of the bottles; it can be finished only by pressing the switch, to save the time and strength. The equipment also assemble the adjusted screw for bottle entering. It is not necessary to change the screw if the bottles’ diameters are similar, it still can be used only by adjusted.

l The stopper machine absorbed the developed technology from Italy, combined the fact of our country to design. It can make sure the quality of stopper machine and also satisfied different kinds of the bottles.

l The caps won’t be down if it has no bottles.

l The  main material of the machine is stainless steel 304.

Our workers are almost 10-year experienced. The whole production process is under close guide and control of our engineer, so as to ensure high-quality products.

Our machine is packed by PE film and then wooden case outside. We give special protect to certain parts by foam so as to avoid any damage. Casters of machine are all fixed tightly to the bottom plate. The outer wooden case is finly made as per the machine size by hand, which is nice in look and strong enough to protect machine during long distance sea shipment.