Food & Beverage Online | B2B Food market platform in China
Product
  • Product
  • Buying Requests
  • Suppliers
Product
  • Product
  • Buying Requests
  • Suppliers
Food online >  Products >  Beverages >  Other Beverages > 

automatic water filling machine,China MIC price supplier

automatic water filling machine
FOB Price:Price can be negotiated
Production Capacity:4 Set/Sets per Month drink water rinsi
Update Time:2022-03-29
Product Description

drink water rinsing/filling/capping three in one Machine
No bottle no filling or capping
High speed pressure filling

MIC24-24-8C Drinking Water Washing Filling Capping three in one Machine

automatic water filling machineFilling Machine" data-width="650" ori-width="630" ori-height="473" />

 
Product Description

  

This series of equipment is mainly used for a variety of polyester bottles of Mineral Water, purified water and other non-carbonated beverage production, realization washing bottle, filling and capping in one machine.

 

Feature

1, The machine uses the card to run bottleneck suspension design work state, so that the bottle at high speed running smoothly and reliably, while significantly reducing the number of parts to make the change when replacing the bottle more convenient and faster.

2, Using a new generation of stainless steel flip-bottle holder, and bottle screw clamp so do not touch the section above, and a nozzle, rinse the inner wall of the bottle full, no dead ends.

3, Using advanced gravity filling technology, filling fast, steady, accurate.

4, Using magnetic torque screw lid, to achieve catch cover, screw cap. Stepless torque screw cap, seal tight and reliable, and does not hurt the cover.

5, Human machine interface touch screen buttons, PLC computer control with a lack of cover, overload warning device, timely detection and troubleshooting, high degree of automation.

6, With water contact parts are made of stainless steel, the main electrical components are internationally renowned manufacturers.

Model

Capability

(bph)

Bottle

Cap type

Airconsume  (m3/m)

Power

(Kw)

Weight

(Kg)

Dimensions

(mm)

Dia(mm)

Height(mm)

Capacity(ml)

MIC12-12-5C

4000

Φ50-Φ100

150-320

330-1500

Plastic screw cap

0.2

4.6

2500

2350*1700*2150

MIC18-18-6C

8000

Φ50-Φ100

150-320

330-1500

0.4

5.4

3800

2350*1700*2150

MIC24-24-8C

12000

Φ50-Φ100

150-320

330-1500

0.4

6.4

5200

3220*2300*2600

MIC32-32-8C

15000

Φ50-Φ100

150-320

330-1500

0.5

8.07

6500

3450*2510*2710

MIC40-40-10C

18000

Φ50-Φ100

150-320

330-1500

0.55

9.56

5000

3800*2800*2710

MIC60-50-15C

20000

Φ50-Φ100

150-320

330-1500

0.6

11.18

11200

4510*3400*2900

 
Packaging & Shipping

  

high quality 3-in-1 mineral water bottle filling machine is packed by standard wooden cases

 

Our Services

We will offer our technician for oversea mineral water bottle filling machine  installation and training service.

We can also provide our Sales as translator to your site help the installation and Training.

Only to provide the local transportation, accommodation, air tickets (round trip) for Sales will be fine.

Thank you for choosing MICMachinery Company.

 

Company Information

We have doing mineral water bottle filling machine for 8 years, after the company recombination, the mineral water bottle filling machine we sold to Europe, Africa, the America states and south America.

We can guarantee our mineral water bottle filling machine for years running with steady working.

We provide 8 hour action, 24hours solution after sale service, in order to avoid the time difference bring the economic and trust lost to our clients.

automatic water filling machine   

 
FAQ

  

For mineral water bottle filling machine question:

First of all , before we operate mineral water bottle filling machine, to clearly understand the instructions clearly mineral water bottle filling machine, first read through the instructions again, adjust and use the familiar mineral water bottle filling machine, the operating time must be in strict accordance with the instructions to mineral water bottle filling machine instructions, pay attention to details of the problem , certainly the details determine success or failure .

Secondly , in accordance with the instructions on the machine for regular repair and maintenance of the mineral water bottle filling machine fuselage Oil it , so mineral water bottle filling machine body as far as possible to protect the reservoir , so that the air can be isolated to avoid wine machine rusty , well protected mineral water bottle filling machine body, and this is a way to extend the life of the 3 in1 bottling machine .

Once again , we have to pay attention to hot stand -sealing cloth for cleaning, not retained foreign body in the above , to ensure clean beverage filling machine try to avoid the amount of material for a long time into the mouth of the left cause corrosion .

Fourth , we should always check the machine to see contacts at various parts of the machine is good, important to ensure safe use of electricity, no electricity properly to prevent harm .

Fifth, if found faulty , we have to turn off the power , when necessary, by pressing the emergency stop button , and then deflated lift cover, and then close the voltage , check the reason

automatic water filling machine automatic water filling machine automatic water filling machine

 

Type:
Filling Machine
Condition:
New
Application:
Beverage,Beverage and water
Packaging Type:
Bottles
Packaging Material:
Plastic
Automatic Grade:
Automatic
Driven Type:
Electric
Voltage:
380v
Power:
6.4kw
Brand Name:
MIC
Model Number:
MIC24-24-8C
Dimension(L*W*H):
3220*2300*2600mm
Weight:
5200kg
Certification:
CE
After-sales Service Provided:
Engineers available to service machinery overseas
Name:
drink water rinsing/filling/capping three in one Machine
Capacity:
330-1500ml
Airconsume:
0.4(m3/m)
Capability:
12000bph
Processing:
Filling Machine
Other Products
Company Profile
Name: Mic Machinery Hangzhou Co., Ltd.
Main Products: Filling machine,Beverage machine,Cosmetic machine,Water treatment,Plastic machine
Business Type: Manufacturer, Trading Company
Total Employees: 51 - 100 People
Established Year: 2014
Main Markets: Eastern Europe, South America, Africa, North America, Southern Europe
Address: Xiasha six street Oujian building
Company Introduction
Our company was founded 2008. Since 2010, the management board has been rebuilt. After reconstruction, we have become a company with one factory, one joint venture factory. What's more, we have 5 offices in China. Here we have connection office for customer convenience.

About machine quality, 80% of machines are made from our own processing machines, and we have Chinese standard and high requirement standard for Europe in order to full fill various markets.

Please do not worry about the installation and training. We offer the machines installation and the translation services. The trader will be your site to help your installation and training.

Aim
Staff is the master of our company. Staff will become the owner of our company.

Management
Learning, growing, adjusting, cultivating, picturing, accrediting, assuming, expanding, inspiring.

Believes
Enterprise is your family. You are the member of this family.

Enterprise Vision
Become a powerful, manufacturing, trading, refreshing concept company; strive to be hundred years' enterprise.

Mission:
Provide the perfect solution for our friends.
more
Browse Hot Product By Alphabetically A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Mic Machinery Hangzhou Co., Ltd.
  • Business Type: Manufacturer, Trading Company
  • Main Products:Filling machine,Beverage machine,Cosmetic machine,Water treatment,Plastic machine
  • Main Markets: Eastern Europe, South America, Africa, North America, Southern Europe
  • Location: Hangzhou, Zhejiang, China
  • Year Established: 2014
Send your message
 
Contact Information
Contact: Mr. Lewis liu
Tel: 0086 - 0571 - 87090718
Fax: - -
Chat Online
For
Buyers
For
Sellers
Share
Product
 
 
 
Share Product
Share to Facebook
Share to LinkedIn
Share to Twitter
Copy Link