plastic stand up pouch with clear window and zipper tear notch,China HOYO price supplier

Product Description

Laminated plastic bag with a hanger for garments	Stand up bag with a zipper for food
Stand up laminated plastic spout pouch	Printing roll-film for auto packing machine

Our Services

Packaging & Shipping

Company Information

FAQ

Q: There is dark corner of lens

    A:   1/3 lens only support CS lens be more than or equal to 6MM, can try to change with 1/2.5 or 1/2 lens (C mount lens need to add CS adapter ring.

Q: Image color is bias towards red

    A:   regularly because the device is in dark position, IR light is auto-on, while the device is remain in color mode. Compare to CMOS, CCD is less influenced by IR light, under same condition, CCD is slightly bias towards red.

Q: There is tailing smear of moving object

    A:   enable the slow shutter makes the frame rate not enough. In order to achieve good image effect in the dark, we will auto enable the slow shutter, to extend the exposure time, if exposure time is over 40ms, the frame rate will not enough, that will cause tailing smear, you can shutdown slow shutter via CMS or WEB.

Q: Firmware upgrade fail

    A:   Few firmware unofficial issued with BUG, can not upgrade via port 34567, but can upgrade via 34561. this is the reserve port for network upgrading.

Q: IPC reboot after power off, using CMS to access, but failed, can not find device.

    A:   when the device is under rebooting, need use CMS to connect it after a while when it is finish rebooting.

Q: 30W D1 960H 130W 200W how much space will be in each hour

    A:   it is related to image quality, different image quality with different bit rate that is showed out, such as D1, default is 1Mbps 1M(1 second) *60*60/8=450M /hour, regularly, SD card for recording, suggest to set motion detect and alarm record and front side, other recording to be save at back side.

Q: Monitor image abnormal, such as too bright, image flicker, poor backlight compensation

    A:   1. base on the image color from client side and integrate with local environment to adjust it to be the best.   2. adjust camera parameter on client side and integrate with local environment to adjust it to be the best.

Q: UPNP function is not working

    A:   1. target router function is stable, suggest to use TP-LINK router 2. target router have UPNP function and it is enable 3. IP address of camera and router is not in the same network segment. 4. after enable UPNP function of camera and reboot device. 5. reboot target router

Q: UPNP function is not working

    A:   1. target router function is stable, suggest to use TP-LINK router 2. target router have UPNP function and it is enable 3. IP address of camera and router is not in the same network segment. 4. after enable UPNP function of camera and reboot device. 5. reboot target router

Q: NTP function in net service is not working

    A:   Enable related function of NTP server.

Q: Can not search out recent video file, if we set client side recording via CMS

    A:   If the client side is under recording, you can not search out file, you nee to stop recording firstly, then you will search out.

Q: Client can't log-in when the IP address was revised, log-in over time and can't find device.

    A:   1. No IP conflict or MAC conflict   2. Close client side, log-in again after 10s.

Q: WIFI function of IP camera is not working

    A:   1. WiFi module and device correctly connected. 2. target router support WIFI and it is enable 3. the password of router that device input is correct. 4. the WIFI module is used is 3070 series 5. IP address of device is in the same network segment.

Q: Set language in regular via CMS, language of CMS is without change

    A:   1. Language setting in regular is regarding the web side, not related to CMS.  2. CMS client side config – language in regular config is to set language of CMS.

Q: Camera can not control the connect PTZ

    A:   Client side PTZ config protocol, address etc should be same as connected PTZ

Q: SD card can not search out video file

    A:   1. SD card with problem,at present only support Kingston SD card.
        2. whether the SD card can be detected.
        3. whether the SD card is successfully format.
        4. whether the searching period is the same as time period of device, since –B
        series how no real-time itself, need timing via client side.
        5. SD card set snapshot partition, then can have snapshot file.
        6. partition of SD card set into Read/Write.
        7. client side set over write when SD card is full.